Tiffany Inspired Cake Tutorial


Tiffany inspired cake

I saw these colours being used in a wedding cake on a TV show and instantly wanted to design my own.  So the next order I got, they had no choice, they were getting a tiffany inspired cake! Luckily, the client who ordered the cake for his wife left the design to me (he also only gave me two days notice!) .

This is a decoration tutorial only,  You can use any cake flavours you like.  This one was vanilla cake with caramel buttercream.

I always sketch out my design. It’s a good way to visualize the cake and also plan how I’m going to go about making it.



I used Renshaw’s jade green (yes, jade green!) fondant mixed with an equal amount of white fondant to achieve the tiffany blue for the disc and the ribbon.   I bought a 500g  packet of the jade green and used only half. Remember the other half is white fondant making a total of 500g.

I also bought the Renshaw’s in black and added some tylose powder (one teaspoon tylose to 500g fondant) to make gumpaste.  This was for the filigree and scroll details on the side of the cake.

I made the bow a day in advance using white gumpaste. The tutorial I used was by Edna de la Cruz. She is an amazing cake artist and a real inspiration


Fondant Bow

I am going to go through the stages of putting together this cake assuming that it’s already been crumb coated, the above blue fondant and back gumpaste have been made up and a bow has been prepared in advance

1) Roll out 1kg white fondant to approximately 16 inches ( the diameter of the cake plus two lots the length of the sides). So my cake was 9 inches in diameter with sides of 3.5 inches so 9 + 3.5 + 3.5 = 16

Cover the cake with this, smooth it out and cut off the excess.  There are countless videos online that demonstrate this.

2) Next roll out half of the tiffany blue fondant so its about 2-3 mm thick. Using the base of an 8 inch cake pan as a guide, cut out an 8 inch circle. Brush a minute amount of water onto the cake top and stick this blue disc centrally onto the cake.

3) Next roll out the black gumpaste as thin as you can handle (1 mm) and using a Stanly knife, free hand, cut out scrolls and filigree shapes. Use online images to pick what you like. I used a variety of designs.  After cutting a few, you may end up coming up with your own designs making your cake even more unique. Let these dry on a tray as you cut out.  Do not stick them directly onto the cake while they are still flexible and moist. They need to dry a little. Remember we are using black on white and black fondant is unforgiving if you place it wrongly as it leaves marks. Drying it a little make it easier to position it before sticking it down. Plus there’s less risk of it tearing as you’re holding it vertically to attach it. After they’ve dried a little, use a TRACE amount of egg white or fondant glue (water and tylose) to stick onto the sides.


Royal Icing writing and pearl borders, blue fondant disc, blue fondant ribbon and black gumpaste filigree/scrolls free hand cuts outs

4) The next stage is to apply the blue fondant ribbon along the bottom edge of the cake. Roll out a long strip (as long as you can) and use a ruler to cut a strip two cm wide. It doesn’t have to be a continuous strip.  If you are precise, you can cut two strips and make a neat join so your cake will have two joins instead of one. Attach with fondant glue or egg white.

5) The writing on the cake is done with royal icing. To make royal icing,  mix one egg white with a teaspoon at a time of icing sugar until the mixture is at soft peak consistency. Mix one-third with black paste colour and store the rest under cling film or a damp cloth to stop it drying out. I used a small 2mm round tip for the writing and the following writing design

6) Mix any left over black royal icing into the rest of the white royal icing to make a grey colour. You can add more black colour paste if u want a darker grey.  Load this into a piping bag fitted with wilton number 5 tip (or a 4 mm round tip) and pipe a pearl border where blue disc meets the white fondant and along the bottom of the cake where the cake meets the board.  You may find this tutorial helpful on how to pipe a pearl border (start watching from 1min 30 sec)


Give the cake 30 mins to dry up. Then position the bow and make some ribbon ends using white gumpaste.  You can angle the bow (just support the angle with some gumpaste discretely placed behind the bow) and make the ribbon ends as long and flowy as you like.  I went for a clean look so kept the ribbon ends short and the bow flat on the cake. Attach with fondant glue or egg white. I liked the way it looked matt and so didn’t use any polishes or glitter.


I think the cake turned out better than I’d imagined! It really was beautiful.


2 thoughts on “Tiffany Inspired Cake Tutorial

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s